Shop

Pool surround BZ "Light granite"

EAN: 4251469301269 | Item no.: 0126

Use the extensively water-permeable pool surround with the thickness of only 18 mm to create a new, comfortable and slip-resistant surrounding on a fixed area up to 30 m² situated around the pool. Cover the existing worn concrete slabs or pool tiles in an easy and economical way and give the floor a new look with the WARCO pool surround.

Obviously, the pool surround is resistant to chlorinated water and weather effects. The frost in the winter is not able to harm the aesthetic tiles either. The Pool surround is especially pleasant to sit and lie on it. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

Type or design
BZ (All-round puzzle joint - slightly rounded edges - slightly profiled underside)
  • €60,80 / 4 piece / m²
  • Plus delivery costs

    (3,73 kg /  piece)
  • Realisation time approx.

    7-14 days
piece

Properties

Colour Light granite The colour design Light granite is a particularly pleasant, light, but not too bright shade of grey. It can be compared to a light granite stone. In order to create products in the colour design Light granite, only colourful, imbued light grey, grey and black EPDM granulate is processed. EPDM (Ethylene Propylene Diene Monomer) is a UV resistant, weatherproof and especially durable elastomer. The colour design Light granite is modern, light and timelessly elegant.

material The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Assembly The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A network of 4 mm deep drainage channels across the elements is formed into the bottom side of the tiles - the one in contact with the base course. The tiles are mounted on an appropriate bound base course. Please take note of the laying instruction.

Characteristics

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Permanent troubleshooting with warranty

Best WARCO quality: re-layable and durable. Rentable, safe investment with 5 years warranty.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories